3/20/05 Machine shop page expanded

4/17/05 Arizona Observing Sites page added

8/6/05 I know, I know, no changes for a while.....  AZ & CA maps links added to Links Page

9/25/05 Some info (including touch up for the paint on the forks) added to the hints page.

10/06/05  The star party page is updated with the trips to the Southern New Mexico star party and Nightfall held in Borrego Springs CA

11/12/05  Image links repaired Dew Heater page 

12/01/05  The LX50-SD design has been finalized and tested!!!  I will start doing the conversion for hire at any time.

12/04/05  Beevo got a new telescope mounting, an Orion Atlas EQ-G goto mount!  I finally have succumbed to the lure of a GEM. 

12/15/05  Fun with a soldering iron!  Making a cable to connect the Atlas GoTo with a Dell AXIM X5 and The Sky Pocket Edition.  See the new Atlas Data Cable page.  Trunks and cases for the Atlas Mount and Meade OTA are nearly done.  Construction information coming soon.

12/22/05 The Case page is partially up.  Featured so far are my eyepiece case which I sell.

12/24/05 The Case Page is nearly complete based on the cases made so far.

12/28/05 Refurbishing of my recently acquired Hobart Wire Welder has commenced.

1/06/06 AutoStar page added to the ETX pages.

1/28/06 New outing info posted.  Star Party Page

2/11/06 Hobart BetaMIG 250 page updated with new progress on the renovation.

2/26/06 Star Party Page Update

3/3/06 Update to the Atlas GoTo page, Ipaq/Sky PE hand controller construction details.

4/6/06 Accessory Page added.

4/30/06 Star Party Page Update

6/23/06 Star Party Page Update

6/24/06 Observing Sites Page Update

6/25/06 Atlas Mounting Page added, first installment is the adapter plate to mount the Atlas Mount on a Meade Deluxe adjustable field tripod.

7/02/06 Bluetooth Adapter information page added for the Atlas Mounting

7/27/06 What to do when you can't observe during the summer monsoons?  Take apart the telescope.  I installed ProtoStar flocked paper in the 10" OTA

8/05/06  I started pulling the Atlas Mount apart to do the re-grease and worm gear adjustments.  A link to the fun so far......

8/13/06 The mounting is done, here is a good description on how to set up the worm shaft centering on the worm wheel.

8/18/06 Added tutorial on greasing cone type bearings

8/20/06 The reassembled mounting works perfectly!  We got a chance to test it out when a break from the monsoons occurred

8/22/06  Detailed disassembly of the DEC and the RA housings now available.  While not complete at this time, they should get you through the process.

9/1/06  Grease It! page updated to reflect cold soak testing of the mounting.

9/2/06 The much anticipated user flash programmable hand controller for the EQ6 (Orion Atlas EQ-G) has been released and is now available! Mine will arrive the week of 21 September

9/12/06 Added drawings to the Tripod adapter page for the Atlas Mounting

9/24/06 Star Party Page Update

9/25/06 The new Ver 3 hand controller for the Atlas EQG arrived today!!

10/22/06 Star party page updated, Atlas hand paddle page updated

11/08/06 Transit of Mercury image posted in the Astronomy Photo Album

11/19/06  Star Party Page reorganized to speed download times.  Outing to Hovatter Norte added.

11/21/06 New pages added!  Battery Page and the Books & Charts Page

11/23/06  SynScan Controller Page added, Observing Sites page updated with directions to some sites and a list of Arizona Clubs.

11/25/06 EQ Direct Page added to site.

12/16/06  Wireless Hand Paddle using a USB keypad for EQ Direct added.

1/14/07 Guide Scope Page moved and finally contains something.  Beevo got a Meade Series 5000 ED80 APO Refractor as a guide scope/auxiliary scope

1/28/07  SynScan Controller Page updated, new firmware available here

1/28/07  EQMOD Hand Controller Page added

2/25/07 Guide Scope Page updated, some test shots added, information on a new mounting foot.

3/10/07  EQMOD wireless Hand Controller project page added

5/13/07  Star Party page updated, Blue Hills Observatory

7/4/07  Optical Adapters page added, first installment is the Williams Optics Crayford focuser adapter

7/15/07  Observatories pages added.

7/21/07  Red Dot finder upgrade for the ETX125 posted on the ETX Add-Ons page

7/27/07  Beevo builds a Dovetail mounting for the Atlas EQ-G

7/28/07 Dovetail  Camera Mounting for the dovetail mounting bar.

10/18/07 NightFall 2007 added to star party page

11/12/07 Sentinal/Schwaar page added to the site.  Comet pictures posted!

12/21/2007 New addition to the machine shop, a Boyer Schultz surface grinder!

12/31/2007 Canon DSLR Battery Eliminator

2/10/2008 Two nights under dark skies!!  Hovatter Norte

2/14/2008 New SynScan Firmware update is released, download it from the SynScan Page

4/19/2008 Page now available for the Beevo Paddle wireless telescope hand controller.

Available now!!!! The all new......

Bill VanOrden (aka Beevo)

Tempe, AZ  USA

33º 22'  N    111º 57'  W

Give or take a meter or two!

All of the images and content of these pages, except where noted and links off this site, are:

© Copyright 1997-2008 by Bill VanOrden

They may not be reproduced, published, copied or transmitted in any form, including electronically on the Internet (World Wide Web), without written permission (an Email request with reply constitutes written permission). Please respect  the intellectual property rights that are protected by the copyright laws of the United States and new International Copyright Treaty.

Disclaimer

I am helping to save the environment! 

This site made entirely with 100% Post Consumer

Content recycled electrons & photons!

Page last updated   4/19/2008